Under Construction!!!

Home

My Clayton & Lambert Lead Melter

Page #2

Please Read: Click on the small pics to see full size versions of them then use your back button in your browser to return here...

 

 

Fig. 1

Valve

Fig. 2

Generator

Fig. 3

Generator Jet

 

Fig. 4

 

Next I removed the Generator Coil and shut-off valve from the fount.

First, loosen the valve stem packing nut then open the valve while continuing to unsrew the nut. This will back the stem out of the valve body. Set aside. Use a 15/16" wrench and loosen the union nut on top of the valve. Remove the generator coil and union and set aside. Now use a 13/16" to remove the valve from the fount. Be mindful of the fuel tube on the bottom of the valve!